Locator Setup RD8100

• Enter Menu Mode
• Scroll to BT - Enter Option
• Scroll to "On" and set it
• Scroll to BT - Enter Option
• Scroll to PROT
  • Scroll to ASCII - Enter Option
    • Scroll to "2" and set it
• Go back to BT - Enter Option
• Scroll to "PAIR" - Enter Option
  • Scroll to "BT-PC" and set it
• Go to Phone
  • Settings
  • Bluetooth
  • Scan
• When RD is found, tap it to PAIR
  
  • Enter 1234 as the passcode

Locator Setup RD8200

• Enter Menu Mode
• Scroll to SMLOG- Enter Option
• Scroll to "On" and set it
• Scroll to PROT- Enter Option
  • Scroll to ASCII - Enter Option
    • Scroll to "2" and set it
• Go back to SMLOG- Enter Option
• Scroll to BT
• Scroll to "PAIR" and set it
• Go to Phone
  • Settings
  • Bluetooth
  • Scan
• When RD is found, tap it to PAIR
  
  • Enter 1234 as the passcode

Locator Setup RD8200SG

• Enter Menu Mode
• Scroll to SMLOG- Enter Option
• Scroll to "On" and set it
• Scroll to PROT- Enter Option
  • Scroll to ASCII - Enter Option
    • Scroll to "2" and set it
• Scroll to Phone
  • Select Android
  • Select BLE
• Go to Phone
  • Settings
  • Bluetooth
• Pair the RDSG connection; and
• Pair the RDSG - RTK connection

TerraFlow Utility Mapper - 8100 and 8200

• Open TerraFlow Utility Mapper
• Open Settings
  • Tap three dots in upper right
  • Tap Settings
• Scroll down to "Sensor Settings"
• Do NOT select the locator in the Locator dropdown - simply leave this as "Select..."

TerraFlow Utility Mapper - 8200SG

• Open TerraFlow Utility Mapper
• Open Settings
  • Tap three dots in upper right
  • Tap Settings
• Scroll down to "Sensor Settings"
• Select the locator in the Locator dropdown
• Enable "Use locator GPS"
• Scroll down to "Location Settings"
• Select "U-Blox" in the "Location Provider"
• Select the locator RTK BLE connection as the "Location Device"
• Contact support for the "Translation to WebMercator" setting
• Correction Settings (Radiodetection 8200SG)
  • Turn On
  • Enter values as provide from the correction source provider